Designed for use with a large number of Det-Tronics gas detectors, the UD30 is approved as a stand-alone device and can perform functions of a gas controller.
Gas level (%), type and unit of measurement are indicated on the digital display. Access to the local event logs and other display capabilities, such as calibration, is accomplished through four (4) magnetic buttons around the display.
The FlexVu® Model UD30 is recommended for applications that require a gas detector with digital readout of detected gas levels as well as analog 4–20 mA output and relay output. The UD30 is designed for use with Det‑Tronics gas detectors such as the GT3000, PIRECL, PIR9400, CGS, ATX10, PIRDUCT, or LS2000, as well as generic linear 4–20 mA sensors. The display unit is designed and approved as a “stand alone” device and performs all the functions of a gas controller.
The UD30 can be used with various 4–20 mA gas detection devices, with or without HART. The unit provides display, alarm and calibration capabilities for the gas detector.
- Local digital LCD continuously indicates gas level, gas type and units measured
- Backlit and heated display
- Internal magnetic switches provide a non-intrusive user interface which allows device configuration without declassifying hazardous areas
- SIL2 models certified to IEC61508 by exida®
- Logs provided for analysis and management include:
- Event: Include fault and alarm logs with runtime hours
- Calibration: With runtime hours
- Temperature: Two sets of minimum and maximum temperature logs with runtime hours
- Signal outputs:
- 0-20 mA output loop with HART when the connected sensor is HART capable
- Two (2) alarm relays and one (1) fault relay
- Visible Outputs:
- Backlit LCD display
- HART pass through
- Two (2) Form C, 3 amps at 30 VDC alarm relays
- One (1) Form C, 3 amps at 30 VDC fault relay
-
Detector compatibility:
- Toxic gas: GT3000 Series
- Combustible gas: PIRECL, PIR9400, PIRDUCT, LS2000, CGS Catalytic
- FlexSonic® Acoustic Gas Leak Detector
- Generic linear 4-20mA sensors
- Rugged construction approved for use in classified hazardous areas
- Available in 316 stainless steel and black epoxy aluminum
